Tilt and Slide Patio Door Repairs Near Me

If you like hosting guests or simply enjoying the outdoors patio doors are a convenient method of transitioning from indoors to out. You may need to adjust your patio door if it is not moving smoothly.

Locate the adjusting screws in the bottom rail and remove the plastic plugs to raise or lower the door. Verify that the door is even and moves smoothly (Photo 1).

Window Treatments

Consider light control, privacy and aesthetics when choosing window treatments for sliding doors. Do you want to block natural light from shining on your furniture or artwork? Or would you prefer that sunlight is only allowed to enter when the sun is not too low in the sky.

The type of window treatment you select can also give you a more custom look. For instance, if your sliding patio door is just one pane of glass, you can add mullions to separate it into several smaller panes of glass for a more decorative appearance. Window treatments are available in soft or hard materials. They range from shades that are cellular, roller shade, woven wood shades, and drapes to curtains drapes, and valances. They can be used as a stand-alone or in combination with other window coverings, like a swag.

One of the most sought-after types of window treatments for patio doors is vertical blinds, which feature wide fabric panels known as vanes that can be opened and closed by tilting, allowing you to regulate the amount of light entering your home. They can be operated using chains, a wand or cord that can be pulled or pushed or push, or by motorized.

A window film can be used to cut down on glare and save energy on the patio that slides. These can be incorporated into your sliding door, or used as an alternative to window treatments, for example a cellular shade.

You can choose an swag or a valance to cover your sliding door to give it more traditional look. They come in a variety of materials and colors, as well as traditional tabs, pinch pleats and grommet styles. You can also get them with a blackout liner to provide more privacy and light control.

Keep in mind that patio doors must be able to slide open and close. It is best to hang window treatments high enough so that they can perform this purpose. This will also keep them out of reach of children and pets.

If your window treatments do not have a rod pocket or are in the form of a valance, then you can use a traverse rod that allows them to move horizontally across your sliding doors. Hang them about one inch higher than your patio doors to ensure they don't brush heads.

Rollers

If your patio door begins to squeak, it is typically due to worn rollers. The rollers, located at the bottom of the door, allowing it to slide along a track, can become stuck or rust over time. This can cause the doors to be difficult to open and close and will create loud noises while in motion. There are several ways to fix your sliding door to allow it to slide back and forth.

Start by making sure that the tracks are lubricated. This will help the door move more smoothly, and must be done at least once a year. You can purchase a high-quality oil at the local hardware store. If you have vinyl tracks you can use a silicone spray. If you have wooden tracks, you can use wax-based lubricant. If the lubricant does not work, you might need to replace the rollers.

You can also try to adjust the rollers. This is a two person task as you will need to lift the door, and then locate the plastic adjustment screws on the bottom of the track. These have a small plug that must be removed with a screwdriver. The screws can be rotated to raise or lower rollers and allow the door to touch less of the track.

Another reason to consider is the door not being seated properly in the track. This could result in a gap between the frame and the door. This can allow cold air to enter on a cold day or hot air to escape on a hot day. If this is the case you'll need to remove the door and frame to see what is causing it to gape.

If the gap was caused by the track you can fix it by removing the upper portion of the track. Then, screw it back to its original position. Installing new tracks can also fill in the gap, giving the door something to rest on when it is in use.

Tracks

It may be time to grease your tracks if they aren't closing or opening smoothly. It's a simple job that will enhance the performance of your patio doors.

Take the door off the frame and set it on a level, flat surface so that it is not in the way while you are working. If the door is heavy, it could be necessary to have another person assist you in lifting and holding it while you work. Utilizing a brush and hot soapy water thoroughly clean the track of your sliding door. Vacuum the blinds between the glass of your sliding doors.

For Next Dimension vinyl patio doors, dirt and dust can build up around the tilt and raise/lower controls, impacting operation. If your door has these features, be sure to regularly clean the surfaces using a solution of vinegar and water or a standard household window cleaner.

Signature and Pro patio doors feature an anti-lift feature that is located inside the head pocket, so they require a 3- 6" opening to eliminate this feature and allow the sill track to lower. Slide the sash/panel into an open position, then lift it up to tilt it towards the back. This will open up the sill pocket so that the track can lower from the head jamb. Repeat the process for both sides of the sash/panel.

Glass

It can be a problem if your patio door frame repair door glass cracks. It can prevent sunlight from entering your home, and can also leave the space unusable until the glass is replaced. It is risky to have cracked glass because it could break and cause serious injuries if someone is struck in the head by shards.

Fortunately, it's quite simple to fix broken doors and frames. The first step is to clean the glass to eliminate any dirt and dust that have built up over time. After cleaning the glass, you can apply a clear coating to shield it from the elements. You can also apply an attractive film to the door to increase the privacy and appearance of the door.

A misaligned roller could be the reason for your sliding glass door not rolling smoothly. Usually, the adjustment screws are situated on the bottom of the door. They might be covered by caps for trim. If you're unable to locate the screws, you can try raising or lower the door until it appears identical to the track.

Make sure you have all the tools you need before you begin repairing patio doors the sliding door. You'll also need an awl and a screwdriver and caulk or plastic putty. You'll need to move all furniture away from the front door to ensure that you can work easily. It's also a good idea to place blankets or foam sheets under the door to protect it from scratches when you take it off and set it down.

Our engineers will determine the manufacturer's name when they arrive at the site of work. You can do this by removing the covers that cover the rollers (bogies) that are located at the bottom of the door. You can also look for a label inside the side panel or on the handle. If you cannot find the label, it is recommended to contact the manufacturer.